Instructions on how to install a direct water heater

Installation tools

You need to prepare some of the following tools and supplies to install a direct water heater.

1. Water heater accessories are available with purchase

The whole machine and accessories are included with the purchase

2. The materials need to prepare to install the machine (Dien May GREEN supports the preparation for customers)

Materials needed to prepare the machine

• Water supply cable.
• Single-phase electrical circuit breakers 20A or 30A.
• Daphaco electric wire.
• Need to buy more flexible hose to fill water into the machine.
• Installation tools include pencil, electric tester, screwdriver, ruler, wrench, wire cutter and drill.

Steps to take

Step 1: Use a screwdriver to remove the mask of the water heater.

Remove the mask of the water heater

Use a screwdriver to remove the screws to remove the front panel of the water heater, being careful to use the correct type of screwdriver so as not to damage the unit.

The water heater is removed from the mask

Step 2: Put the machine on the wall, use a ruler to make sure the machine is lying flat. Use a pencil to mark the hanger and the holes along the back of the machine.

Use a ruler to place the machine neatly and then mark it with a pencil

Take the machine out of position and start drilling holes, close the stopper and then place the machine so that the available holes are aligned with the position of the stopper, tighten the screws.

Screw the machine to the wall

Step 3: Locate the location to install the shower faucet and CB. Select the appropriate position and then mark the hole with a pencil through the holes on the slider, then proceed to fix the slide position on the wall, screw the screw to complete the installation of the accessory.

Determine the location of the shower faucet and CB

Mount the CB on the wall.

Mount the CB on the wall

Next, proceed to install the shower on the wall.

Mount the shower on the wall

Tighten the faucet fixing screw.

Tighten the showerhead fixing screw

Step 4: We proceed to install the 3-in-1 valve and the water inlet on the right side of the machine. Use a wrench to turn the valve in and then remove the warning stickers attached to the top of the valve, taking care not to drop the loose mesh, the rubber gasket at the top of the valve.

Take care not to drop the loose mesh, rubber gasket at the valve head

Install the 3-in-1 valve and water inlet on the right side of the machine.

Attach the 3-in-1 valve and remove the sticker

Connect the valve end to the water line, the other end to the water supply line. Twist with moderate force so as not to damage the connector.

Use a plastic pipe to connect the 3-in-1 valve to the water supply valve

Connect the shower arm to the water outlet on the left front left side of the water heater.

Connect the hand shower to the water outlet

Step 5: Connect the power to the machine

Install the phase wire, neutral wire and ground wire of the machine into the contacts. Make sure the wires are connected correctly and securely.

Connect the wire to the contact

Connect the machine to the previously mounted CB.

Connect the machine to the previously mounted CB

Finally, proceed to install the front panel on the machine, using the correct screws removed in the first steps. Remove the scratch-resistant screen on the front and then insert the adjustment buttons, need to check if the adjustment buttons fit properly.

Install the front of the machine and insert the control knob

Installation of the water heater is complete.

Installation of water heater completed

Step 6: Conduct ground / ground connection for the machine to avoid electric leakage causing danger to users.

Check the machine's operating functions and guide customers to use

Step 1: Check if the ELCB anti-shock CB & other functions on the machine work or not.

Check if the ELCB anti-shock CB on the machine is working or not

Step 2: Instruct customers to use the machine's function buttons.

Guide customers to use the function buttons of the machine

The installation of the direct water heater is completed.

Hopefully the article has provided you with useful information to install a water heater quickly and efficiently. Please leave a comment for Dien May XANH in the box below!

Article using Ariston IM-4522EP water heater 4.5kW

The post https://meo.tips/using/instructions-on-how-to-install-a-direct-water-heater/ appeared first on Meo.tips.

View more from Meo.tips:

6 tips to keep your hands beautiful even though you have to do housework every day
8 beautiful hairstyles for March 8 to help her confidently "shine"
Pose with ao dai on the occasion of the New Year with all different styles
5 household items that can be taken for travel
Where to go the least expensive and not crowded during this holiday 2-9?
The most ideal tourist destination in Hoi An – Quang Nam you should not miss
Top tourist destinations in Bac Lieu garden, discover unique cultures
Top 8 homestays in Trang An, Ninh Binh with beautiful poetic view, very genuine, near the center
Top 8 famous temples in Ho Chi Minh City should go on Vu Lan day
The best way to plug a headset into the desktop
20 effective ways to save iPhone battery you may not know
How to make a simple handmade stylus for Smartphone using foil and cotton swabs
Instructions on how to install a direct water heater
Refrigerator sweat, condensation? The cause and how to fix it
What does it mean to wear a watch on the left or right hand? Which hand is more convenient?
Instructions for booking CGV movie tickets on your phone
4 basic steps to use the printer properly for first time users
iPhone cannot access 3G, causes and solutions
12 ways to speed up battery charging for the fastest phone without damaging the device
Summer makeup for oily skin is extremely effective with only 7 steps